[root@ITI-VN-87-VM local]# /usr/local/mariadb/columnstore/bin/postConfigure This is the MariaDB ColumnStore System Configuration and Installation tool. It will Configure the MariaDB ColumnStore System and will perform a Package Installation of all of the Servers within the System that is being configured. IMPORTANT: This tool should only be run on the Parent OAM Module which is a Performance Module, preferred Module #1 Prompting instructions: Press 'enter' to accept a value in (), if available or Enter one of the options within [], if available, or Enter a new value ===== Setup System Server Type Configuration ===== There are 2 options when configuring the System Server Type: single and multi 'single' - Single-Server install is used when there will only be 1 server configured on the system. It can also be used for production systems, if the plan is to stay single-server. 'multi' - Multi-Server install is used when you want to configure multiple servers now or in the future. With Multi-Server install, you can still configure just 1 server now and add on addition servers/modules in the future. Select the type of System Server install [1=single, 2=multi] (2) > 2 ===== Setup System Module Type Configuration ===== There are 2 options when configuring the System Module Type: separate and combined 'separate' - User and Performance functionality on separate servers. 'combined' - User and Performance functionality on the same server Select the type of System Module Install [1=separate, 2=combined] (2) > 1 Seperate Server Installation will be performed. NOTE: Local Query Feature allows the ability to query data from a single Performance Module. Check MariaDB ColumnStore Admin Guide for additional information. Enable Local Query feature? [y,n] (n) > n NOTE: The MariaDB ColumnStore Schema Sync feature will replicate all of the schemas and InnoDB tables across the User Module nodes. This feature can be enabled or disabled, for example, if you wish to configure your own replication post installation. MariaDB ColumnStore Schema Sync feature, do you want to enable? [y,n] (y) > y NOTE: MariaDB ColumnStore Replication Feature is enabled Enter System Name (columnstore-1) > mymcs1 ===== Setup Storage Configuration ===== ----- Setup Performance Module DBRoot Data Storage Mount Configuration ----- There are 2 options when configuring the storage: internal or external 'internal' - This is specified when a local disk is used for the DBRoot storage. High Availability Server Failover is not Supported in this mode 'external' - This is specified when the DBRoot directories are mounted. High Availability Server Failover is Supported in this mode. Select the type of Data Storage [1=internal, 2=external] (1) > 1 ===== Setup Memory Configuration ===== NOTE: Setting 'NumBlocksPct' to 70% Setting 'TotalUmMemory' to 50% ===== Setup the Module Configuration ===== ----- User Module Configuration ----- Enter number of User Modules [1,1024] (1) > 1 *** User Module #1 Configuration *** Enter Nic Interface #1 Host Name (unassigned) > um1 Enter Nic Interface #1 IP Address of um1 (0.0.0.0) > 192.168.84.87 Enter Nic Interface #2 Host Name (unassigned) > ----- Performance Module Configuration ----- Enter number of Performance Modules [1,1024] (1) > 1 *** Parent OAM Module Performance Module #1 Configuration *** Enter Nic Interface #1 Host Name (ITI-VN-87-VM) > pm1 Enter Nic Interface #1 IP Address of pm1 (0.0.0.0) > 192.168.84.85 Enter Nic Interface #2 Host Name (unassigned) > Enter the list (Nx,Ny,Nz) or range (Nx-Nz) of DBRoot IDs assigned to module 'pm1' (1) > 1 ===== System Installation ===== System Configuration is complete, System Installation is the next step. Would you like to continue with the System Installation? [y,n] (y) > y Enter the Package Type being installed to other servers [rpm,deb,binary] (rpm) > binary Performing an MariaDB ColumnStore System install using a Binary package located in the /root directory. Error: can't locate mariadb-columnstore-1.0.7-1 Package in directory /root Please place a copy of the MariaDB ColumnStore Packages in directory /root and press to continue or enter 'exit' to exit the install > Next step is to enter the password to access the other Servers. This is either your password or you can default to using a ssh key If using a password, the password needs to be the same on all Servers. Enter password, hit 'enter' to default to using a ssh key, or 'exit' > Confirm password > ----- Performing Install on 'um1 / um1' ----- Install log file is located here: /tmp/um1_binary_install.log MariaDB ColumnStore Package being installed, please wait ... DONE ===== Checking MariaDB ColumnStore System Logging Functionality ===== The MariaDB ColumnStore system logging is setup and working on local server MariaDB ColumnStore System Configuration and Installation is Completed ===== MariaDB ColumnStore System Startup ===== System Installation is complete. If any part of the install failed, the problem should be investigated and resolved before continuing. Would you like to startup the MariaDB ColumnStore System? [y,n] (y) > y ----- Starting MariaDB ColumnStore on 'um1' ----- MariaDB ColumnStore successfully started ----- Starting MariaDB ColumnStore on local server ----- MariaDB ColumnStore successfully started MariaDB ColumnStore Database Platform Starting, please wait ................. MariaDB ColumnStore System failed to start, check log files in /var/log/mariadb/columnstore